P0340 OBD Trouble Code
5 results found
| Type | Powertrain - Ignition System or Misfire - ISO/SAE Controlled |
|---|---|
| Description | Camshaft Position Sensor "A" Circuit |
| Location | Bank 1 or Single Sensor |
| Type | Powertrain - Ignition System or Misfire - ISO/SAE Controlled |
|---|---|
| Description | No Camshaft Synch Signal To PCM Conditions |
| Cause | Engine cranking with 32 CKP sensor pulses received, then the test started and the PCM did not detect any CMP sensor pulses for 2 seconds |
| Type | Powertrain - Ignition System or Misfire - ISO/SAE Controlled |
|---|---|
| Description | Camshaft Position Sensor Circuit Conditions |
| Cause | Engine running, then the PCM detected that the CMP sensor signal was missing |
| Type | Powertrain - Ignition System or Misfire - ISO/SAE Controlled |
|---|---|
| Description | CMP Sensor Circuit Conditions |
| Cause | Engine cranking for 2 seconds, then the PCM did not detect a CMP sensor pulse, condition met for 2 seconds |
| Type | Powertrain - Ignition System or Misfire - ISO/SAE Controlled |
|---|---|
| Description | Camshaft position (CMP) sensor - circuit malfunction |
| Cause | Wiring, CMP sensor, Starter motor, ECM |
Try also: https://www.obd-codes.com/p0340
