P1409 OBD Trouble Code
5 results found
| Type | Powertrain - Manufacturer Controlled DTC - Manufacturer Controlled |
|---|---|
| Description | Evaporative emission (EVAP) canister purge valve - circuit malfunction |
| Cause | Wiring, EVAP canister purge valve |
| Type | Powertrain - Manufacturer Controlled DTC - Manufacturer Controlled |
|---|---|
| Description | EGR Electronic Vacuum Regulator Solenoid Circuit Conditions |
| Cause | Engine running, then test started and the PCM detected that the EGR VR solenoid voltage was too low or high when compared to expected range (the EGR system must be enabled and operating during this test) |
| Type | Powertrain - Manufacturer Controlled DTC - Manufacturer Controlled |
|---|---|
| Description | Exhaust gas recirculation (EGR) solenoid |
| Cause | Wiring, EGR solenoid, EGR temperature sensor, EGR solenoid |
| Type | Powertrain - Manufacturer Controlled DTC - Manufacturer Controlled |
|---|---|
| Description | Electronic vacuum regulator control - circuit malfunction |
| Cause | Wiring, ECM |
| Type | Powertrain - Manufacturer Controlled DTC - Manufacturer Controlled |
|---|---|
| Description | Evaporative emission (EVAP) canister purge valve - circuit malfunction |
| Cause | Wiring, EVAP canister purge valve |
Try also: https://www.obd-codes.com/p1409
